Optiblast OBS-150 : Sandblasting Machine
Characteristics:
PERFORMANCE:
• Concrete repair
• Concrete pre casting industry: structural sand blasting
• Carefull surface cleaning
• Monument maintenance
• Cleaning or wood
• Cristal labeling.
• Steel construction industry - cleaning up.
• Preparation of metallic surfaces for its primer
• Stainless steel surface preparation
• Boiler cleaning in the petrochemistry Industry
• Concrete repair
• Concrete pre casting industry: structural sand blasting
• Carefull surface cleaning
• Monument maintenance
• Cleaning or wood
• Cristal labeling.
• Steel construction industry - cleaning up.
• Preparation of metallic surfaces for its primer
• Stainless steel surface preparation
• Boiler cleaning in the petrochemistry Industry
Standard equipment:
STANDARD EQUIPMENT:
• Air/water cleaner with remote control (10 m. cable).
• Safety switch
• Abrasive cleaner with sieve (3,5 mm.).
• Low pressure regulator 1-5 bar ('soft').
• Water Injector for wet blasting
• Indraught water hose
• Membrane pump of double drive by a DKM 160 piston.
• Air/water cleaner with remote control (10 m. cable).
• Safety switch
• Abrasive cleaner with sieve (3,5 mm.).
• Low pressure regulator 1-5 bar ('soft').
• Water Injector for wet blasting
• Indraught water hose
• Membrane pump of double drive by a DKM 160 piston.
Technical data:
Presión del chorro
1-10 bar, con progresión continua 1-5 bar
Presión de servicio
Aire máx. 10 bar, Agua máx. 12 bar
Presión del compresor
Min. 4 bar, máx. 10 bar
Potencia del compresor
2 m3/min., 10 m3/min.
Tensión de maniobra
12 V DC / 20 W
Condiciones de trabajo
min. +4ºC, máx. +50ºC
Bomba de agua
160 cm3/carrera doble, máx. 17 l./min., multiplicador de presión> 1,23 : 1
Volumen de la caldera
150 l
Dimensiones LxAxH (mm)
1.150 x 800 x 1.250
Peso
210 Kg
Medios para chorrear
Todos los que están en el mercado hasta 3,5 mm de granulación; arena húmeda de cantera
Reference
3115000000
Spare parts:
Description
Reference
1
MORTAR HOSE 25x39 mm. 40 BAR.
38100
2
PLASTIC COUPLING FOR 25MM. HOSE OPTIBLAST
76250
3
COUPLING FOR HOSE-PISTOL OPTIBLAST
5243
4
PROTECTIVE HELMET "PANORAMA" WITH BISONYL VISOR PROTECTION OPTIBLAST
0000002671
5
NOZZLE WITH THREAD PLASTIC 13 MM.
0604000000
6
NOZZLE WITH THREAD PLASTIC 8 MM.
0602000000
7
ELECTRIC CABLE 3x2'5 (50 MTS) WITH PLUG
36003
© Copyright 2007, UTIFORM TECHNOLOGIES | Aviso legal