REV-4 : Trowelling Machine
One-phasesteady current electric trowelling machine for render and mortar finishes
One-phasesteady current electric trowelling machine for render and mortar finishes
Characteristics:
• Electric trowelling machine for render and mortar finishes.
• Standard equipped with a low voltage cable.
• Useful for applications on ceilings, walls and floors due to a special support.
• No accident risk: works with 48 V..
• Gives a complete freedom to move in different positions.
• Quick adaptable to any kind of surfaces.
• The turning direction of the machine reduces its weight while used.
• Standard equipped with a low voltage cable.
• Useful for applications on ceilings, walls and floors due to a special support.
• No accident risk: works with 48 V..
• Gives a complete freedom to move in different positions.
• Quick adaptable to any kind of surfaces.
• The turning direction of the machine reduces its weight while used.
Standard equipment:
• Metallic briefcase with lock and handle to transport it.
• Trowelling machine with water dispenser and sponge plates.
• 20 m. watertight and anticracks protection conduct cable.
• 10 m. electric connection cable with plugs.
• Block with water deposit and handle for easy transport.
• Speed regulator.
• 1 blue sponge for mortars.
• 1 brown sponge for gypsum.
• 1 white sponge for fine works.
• 1 flat plate for float works.
• 1 red plate for mortar palette.
• 1 plate with flexible blades.
• 1 year parts warranty
• Trowelling machine with water dispenser and sponge plates.
• 20 m. watertight and anticracks protection conduct cable.
• 10 m. electric connection cable with plugs.
• Block with water deposit and handle for easy transport.
• Speed regulator.
• 1 blue sponge for mortars.
• 1 brown sponge for gypsum.
• 1 white sponge for fine works.
• 1 flat plate for float works.
• 1 red plate for mortar palette.
• 1 plate with flexible blades.
• 1 year parts warranty
Technical data:
Peso total (fratas + accesorios)
50 Kg
Peso bloque centralita
25 Kg
Corriente alimentación
220V/50Hz
Giro mínimo disco
40 rpm
Giro máximo disco
120 rpm
Tensión
48V
Potencia motor
90W
Longitud cable
20m
Grado protección cuadro eléctrico
IP55
Trabajos finos
60 m2/h
Trabajos rústicos
60 m2/h
Trabajos en grueso
50 m2/h
Raspado y lijado de colores
40 m2/h
Reference
20250001
Spare parts:
© Copyright 2007, UTIFORM TECHNOLOGIES | Aviso legal