P5 : Mixing Pumps
Electric or diesel machine to pump and spray with traditional and special materials
Electric or diesel machine to pump and spray with traditional and special materials
Characteristics:
• Electric or Diesel piston pump for traditional mortar.
• Pumps material by piston, sprays and injects all sorts of traditional mixes.
• Sprays micro concrete.
• Suitable for all sorts of traditional mortar mixes.
• Pumps the material without interuptions and low wear.
• Max. Output in difficult circumstances.
• Pumps material by piston, sprays and injects all sorts of traditional mixes.
• Sprays micro concrete.
• Suitable for all sorts of traditional mortar mixes.
• Pumps the material without interuptions and low wear.
• Max. Output in difficult circumstances.
Standard equipment:
• Diesel or Electric Motor (depending on model).
• 2 Cleaning balls.
• Tool Kit.
• Warranty Certificate.
• CE Certificate.
• Parts book and manual.
• 2 Cleaning balls.
• Tool Kit.
• Warranty Certificate.
• CE Certificate.
• Parts book and manual.
Technical data:
E
EV (variator)
230 V.
Electrical connection
400 V / 50 Hz
400 V / 50 Hz
230 V / 50 Hz
Power of electric motor
4,8 - 6,0 Kw
5,5 Kw
4 Kw
Grain size* 2L6
0 a 4 - 6 mm
0 a 4 - 6 mm
0 a 4 - 6 mm
Maximum working pressure
10 a 30 bar
10 a 30 bar
10 a 30 bar
Theoretical power range
20 - 45 l/min
5 - 40 l/min
20 - 45 l/min
Loading height (without vibrating sieve)
550 mm
550 mm
550 mm
Size LxWxH (mm)
2280 x 700 x 700
2280 x 700 x 700
2280 x 700 x 700
Reference
2002024
2002009
* Depending on the consistency, quality and composition of the material, in addition to the model and condition of the pump, diameter and length of the conveying hose and the pumping height
Spare parts:
Description
Reference
1
RUBBER BALL FOR SECURITY PD 5
013153009
2
STATOR PISTON PD 5
013118002
3
SEAT VALVE P5
013116004
4
SPRAYING GUN PD 5
01306004
5
013153016
6
JOINT PISTON SLEEVE PD 5 101x6 DIN 3771
013157005
7
RUBBER BAND PISTON INSIDE PD5
013153015
8
SPRAY GUN HEAD PROJECTION PD5
01305005
© Copyright 2007, UTIFORM TECHNOLOGIES | Aviso legal